# Atim DIND160 | TagoIO Devices

> Dry contacts and Metering over LoRaWAN or Sigfox

![Atim DIND160](https://decoders.assets.tago.io/decoders/connector/atim/dind160/assets/logo.png)

Dry contacts and Metering over LoRaWAN or Sigfox

The ACW-DIND160 monitors the status of dry contacts status and meters’ index consumption and control digital outputs (open collector, push / pull and dry contact type) and send the data to LoRa or Sigfox. Remotely control equipment or PLCs using the dry contacts outputs. Possibility to add a digital temperature probe via jack plug (option). Compatible with Sigfox repeater (ACW-GW). Contains 16 inputs.

**Technical Data**
* Dimensions: 53 x 67 x 95 mm
* Antenna: External (SMA connector)
* Temperature: -20°C to +55°C (operation), -40°C to +70°C (storage)
* Mounts to: DIN rail compliant
* Power supply: 1x 10-30Vcc
* Consumption: 100mA
* Digital inputs TOR: 16 configurable inputs, change of state alerting, 8 meters configurable on whatever input (4 meters before version V1.2.0), available activation of 4 groups of inputs
* Digital outputs TOR: 8 outputs driven via downlink
* Alarm: Wrenching / Shock
* Frequency: 865-870 MHz
* Power: 25 mW (14 dBm)
* Transfer rate: Sigfox: 100 bit/s, LoRaWAN: 300 bit/s to 10 kbit/s

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/5ff31a5876f32c002820f674)

[llms.txt](https://tago.io/llms.txt)