# Atim DINRSM | TagoIO Devices

> Modbus master Gateway over LoRaWAN or Sigfox

![Atim DINRSM](https://decoders.assets.tago.io/decoders/connector/atim/dinrsm/assets/logo.png)

Modbus master Gateway over LoRaWAN or Sigfox

The ACW-DINRSM interrogates up to 49 modbus registers from slaves PLCs and sends its answers to LoRa or Sigfox. The devices act as a Master reading and writing into the Slaves to monitor or request on demand specific registers. When connected in serial link, up to 49 PLCs can be controlled by 1x ACW-DINRSM. Data frequency of transmission, registers and slaves requests setup are to be made on the ACW configurator. Compatible with Sigfox repeater (ACW-GW).

**Technical Data**
* Dimensions: 90 x 57 x 17,9 mm
* Antenna: External (SMA connector)
* Temperature: -20°C to +55°C (operation), -40°C to +70°C (storage)
* Mounts to: DIN rail compliant
* Power supply: 1x 10-30Vdc
* Frequency: 865-870 MHz
* Power: 25 mW (14 dBm)
* Transfer rate: Sigfox: 100 bit/s, LoRaWAN: 300 bit/s to 10 kbit/s

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/5ff31e4b76f32c0028216202)

[llms.txt](https://tago.io/llms.txt)