# Atim MR2 | TagoIO Devices

> Metering index of water, gas or electricity, or for remote bang-bang equipment control over LoRaWAN or Sigfox

![Atim MR2](https://decoders.assets.tago.io/decoders/connector/atim/mr2/assets/logo.png)

Metering index of water, gas or electricity, or for remote bang-bang equipment control over LoRaWAN or Sigfox

The ACW-MR2 is a sensor used for remote metering monitoring (gas, water, electricity, pluviometer meters…) or for remote bang-bang equipment control (eg: starting up/shutting down, opening/closing...). This sensor can be connected up to 2 independent equipment when they are close enough, allowing devices and network plans savings.

**Technical Data**
* Dimesions: 177 x 55 x 55 mm
* Antenna: Integrated (¼ wave)
* Temperature: -20°C to +55°C (operation), -40°C to +70°C (storage)
* Mounts to: Wall, Mast, DIN-rail
* Casing: IP65
* Power supply: 2 packs of 2 batteries equivalent to 14.4 Ah
* Weight: 160g
* Frequency: 865-870 MHz
* Power: 25mW (14 dBm) 
* Transfer rate: Sigfox: 100 bit/s, LoRaWAN: 300 bit/s to 10 kbit/s

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/5ff31f4a8fc7c10028d5bc59)

[llms.txt](https://tago.io/llms.txt)