# Atim TH-I | TagoIO Devices

> Indoor Temperature and Humidity sensor over LoRaWAN or Sigfox

![Atim TH-I](https://decoders.assets.tago.io/decoders/connector/atim/th-i/assets/logo.png)

Indoor Temperature and Humidity sensor over LoRaWAN or Sigfox

The ACW-TH-I monitors and transmits the indoor temperature and humidity of all types of buildings (industrial, tertiary, hospital, etc.).

**Technical Data**
* Dimensions: 80 x 80 x 35 mm
* Antenna: Integrated (¼ wave)
* Temperature: -20°C to +55°C (operation), -40°C to +70°C (storage)
* Mounts to: Wall
* Housing: Building automation
* Power supply: 1 battery-pack 3,6V / 7,2 mAh
* Weight: 100g
* Frequency: 865-870 MHz
* Power: 25 mW (14 dBm)
* Transfer rate: Local 1.2 to 115 kbit/s, Sigfox 100 bit/s, LoRaWAN 300 bit/s to 10 kbit/s

**Temperature Sensor**
* Range: -40 to +125°C
* Resolution: 0.01°C (14 bits)
* Precision from -40°C to -10°C: -0.7°C/+0.9°C
* Precision from -10°C to 85°C: +-0.3°C
* Precision from 85°C to 125°C: -0.7°C/+0.9°C

**Humidity Sensor**
* Range: 0% RH to 100% RH
* Resolution: 0.025% RH RMS (12 bits)
* Precision between 0 and 80% RH: +-3% RH

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/5ff3202676f32c002821a0f7)

[llms.txt](https://tago.io/llms.txt)