# Atim TM1P | TagoIO Devices

> Temperature sensor over LoRaWAN or Sigfox

![Atim TM1P](https://decoders.assets.tago.io/decoders/connector/atim/tm1p/assets/logo.png)

Temperature sensor over LoRaWAN or Sigfox

The ACW-TM1P monitors and transmits one remote temperature. The sensor has 1 external PT100/PT1000 analog probe. Data transmission at regular intervals configurable as required through the ACW configurator. Compatible with Sigfox repeater (ACW-GW).

**Technical Data**
* Dimensions: 154 x 54 x 54 mm
* Antenna: Integrated (¼ wave)
* Temperature probe: 1 analog probe PT100 or PT1000
* Temperature: -25°C to +70°C (operation), -40°C to +70°C (storage)
* Mounts to: Wall, tube or mast, DIN rail
* Housing: IP65
* Power supply: 2x battery-packs (14,4 Ah)
* Weight: 305g
* Frequency: 863-870 MHz
* Power: 25 mW (14 dBm)
* Transfer rate: Sigfox: 100 bit/s, LoRaWAN: 300 bit/s to 10 kbit/s

**Temperature Sensor**
* Range: -327.68°C to +327.67°C
* Resolution: 0.05°C
* Precision from -25°C to +70°C (Operating range): 0.5 (Data applicable to 2-wire probes)

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/5ff3292c76f32c0028228e3b)

[llms.txt](https://tago.io/llms.txt)