# Bosch XDK LoRa-Extension | TagoIO Devices

> XDK Extension module from Bosch over LoRaWan™

![Bosch XDK LoRa-Extension](https://api.tago.io/file/5bbcb03b667d7a002e56664b/bosch/xdk-lora-extension.png)

XDK Extension module from Bosch over LoRaWan™

**NOTE:** THIS CONNECTOR DOES NOT ADD A PARSER
The XDK LoRa-Extension is a wireless and secure communication solution that allows for penetrating structures such asbuildings. You can exchange your data up to a range of 40km. With the brand new XDK LoRa-Extension you can now connect your XDK to a LoRa network. Take advantage of measuring data with 8 different XDK-sensors and connect the data via LoRa to your backend. 

Some advantages:
* All-in-one sensor kit: no need for component selection or hardware assembly
* Small form factor (Length 46mm x Width 40mm x Height 22mm, Weight 33g)
* Drivers for all system components included
* CE and LoRaWAN certified   |   Further on request

**Operating conditions**
* Indoor use
* IP Rating: IP30
* Supply Voltage: 2,5V DC via XDK extension port
* Radio Power: max. 13 dBm EIRP
* Frequency Band: 868.0-868.6 MHz
* Physical interface and pin designation: see the XDK110 User Guide

If a parser is needed, see how you can [create your own parser](https://help.tago.io/portal/en/kb/articles/118-building-your-own-parser)

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/5fb7d37897e266002c1a1b76)

[llms.txt](https://tago.io/llms.txt)