# Milesight UC1114 | TagoIO Devices

> Remote I/O with 2 dry contacts and 2 drivable relay outputs for industrial application over LoRaWAN™

![Milesight UC1114](https://decoders.assets.tago.io/decoders/connector/milesight/uc1114/assets/logo.png)

Remote I/O with 2 dry contacts and 2 drivable relay outputs for industrial application over LoRaWAN™

Milesight UC1114 is designed as a cost-effective industrial machine monitoring device that monitors and controls up to 2 dry contacts and 2 drivable relay outputs. With the aid of Milesight UC1114, the alarm condition brings attention to engineering personnel immediately. The output can be connected with an alarm indication device, such as a light or horn. The device can give immediate response to the status of both the input and output conditions. A LoRa module is embedded in the Milesight UC1114.

**Parameters**
* Antenna: 50 Ω SMA Antenna Interface
* Frequency Band: EU 433, CN 470-510, IN865, EU 863-870, US 902-928, AU 915-928, KR 920-923
* Sensitivity: -147 dBm @300bps
* Output Power: 20 dBm
* Protocol: LoRaWAN Class C
* Digital Input: Opto-isolated depending on voltage. Can accept any DC signals of any type, including: ➢ DC Voltage (3-24 V)
* Digital Output: 2 x SPDT Relay Contact Rating: 3Amp DC (Max: 30 V) or 3Amp AC (Max: 250 V)
* IO Connector Type: Screw terminals
* DC Power Supply: 5-24 VDC
* Operating Temperature: -40°C to +70°C (-40°F to +158°F)
* Relative Humidity: 0% to 95% (non-condensing)
* Dimensions: 79 x 60 x 24 mm

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/60379bc29cc2f30011523953)

[llms.txt](https://tago.io/llms.txt)