# Milesight UC1122 | TagoIO Devices

> Remote I/O with 1 DC signal, 1 drivable relay output and 2 analog inputs for industrial application over LoRaWAN™

![Milesight UC1122](https://decoders.assets.tago.io/decoders/connector/milesight/uc1122/assets/logo.png)

Remote I/O with 1 DC signal, 1 drivable relay output and 2 analog inputs for industrial application over LoRaWAN™

Milesight UC1122 is designed as a cost-effective industrial machine monitoring device that monitors and controls up to 1 DC signal, 1 drivable relay output and 2 analog inputs. With the aid of Milesight UC1122, the alarm condition brings attention to engineering personnel immediately. The output can be connected with an alarm indication device, such as a light or horn. The module can give immediate response to the status of both the input and output conditions. A LoRa module is embedded in the Milesight UC1122 . 

**Parameters**
* Antenna: 50 Ω SMA Antenna Interface
* Frequency Band: EU 433, CN 470-510, EU 863-870, IN865, US 902-928, AU 915-928, KR 920-923
* Sensitivity: -147 dBm @300bps
* Output Power: 20dBm
* Protocol: LoRaWAN Class C
* Analog Input:  4-20 mA (0-5 V Optional). Differential inputs, 12 bit
* Digital Input: Opto-isolated depending on voltage. Can accept any DC signals of any type, including: ➢ Dry Contacts ➢ DC Voltage (3 - 20V). High Voltage: +3V ~ +24V Low Voltage: +1V max
* Digital Output: 1 x SPDT Relay Contact Rating: Maximum Load Current: 250VAC/30VDC@3A
* IO Connector type: Screw Terminals
* DC Power Supply: 5-24 VDC
* Operating Temperature: -40°C to +70°C (-40°F to +158°F)
* Relative Humidity: 0% to 95% (non- condensing)
* Dimensions: 79 x 60 x 24 mm

[Connect this Device](https://admin.tago.io/connectors/5ede22a7427104001c248b08/6037a37351cb1b001164372a)

[llms.txt](https://tago.io/llms.txt)