Back to Devices

Atim DINRSM

The ACW-DINRSM interrogates up to 49 modbus registers from slaves PLCs and sends its answers to LoRa or Sigfox. The devices act as a Master reading and writing into the Slaves to monitor or request on demand specific registers. When connected in serial link, up to 49 PLCs can be controlled by 1x ACW-DINRSM. Data frequency of transmission, registers and slaves requests setup are to be made on the ACW configurator. Compatible with Sigfox repeater (ACW-GW).

Technical Data

  • Dimensions: 90 x 57 x 17,9 mm
  • Antenna: External (SMA connector)
  • Temperature: -20°C to +55°C (operation), -40°C to +70°C (storage)
  • Mounts to: DIN rail compliant
  • Power supply: 1x 10-30Vdc
  • Frequency: 865-870 MHz
  • Power: 25 mW (14 dBm)
  • Transfer rate: Sigfox: 100 bit/s, LoRaWAN: 300 bit/s to 10 kbit/s
Connect this Device
Atim DINRSM logo
Compatible Networks
LoRaWAN Actility LoRaWAN ChirpStack LoRaWAN Everynet LoRaWAN Kerlink LoRaWAN Loriot LoRaWAN MachineQ LoRaWAN Orbiwise LoRaWAN Senet LoRaWAN SenRa LoRaWAN Swisscom LoRaWAN Tektelic LoRaWAN TTI/TTN v3 Sigfox LoRaWAN Helium